Checklist Sample

Taken from our massive custom checklist, this is merely a part of the entire Plumbing Section we use. When translating this checklist to your report we add photographs, comments and detailed narratives explaining our findings. Then we put it in a secure storage location where you can access it from any internet access point, for a period of up to five years..

From: Main Plumbing System:

1. The visible plumbing lines and joints were in (G/A/F/P) G___A___F___P___condition.

1.2 There were signs of excessive rust or leaks that need to be further evaluated by a licensed plumbing contractor, Yes___ No___.

*The types of plumbing line materials used in housing construction include: Copper, Brass, Galvanized

Iron, Lead, PVC, and Cast Iron.

2. The visible supply plumbing lines are made of __________________________.

3. The visible drainage plumbing lines are made of __________________________.

4. The visible portion of the water main entry line is made of_______________________.

4.1 The main water line is securely fastened to the wall to help prevent damage to the plumbing joints, Yes___ No___.

5. The water main shutoff valve is in (G/A/F/P) G___A___F___P___ condition.

5.1. This valve does appear to be in proper working order, Yes___ No___.

*This valve is used to turn off the water entering the house.

The main shutoff valve cannot be tested during a home inspection

due to the possibility of it becoming rusty over time and if tested it

can "freeze" in the on or off position, or possibly leak.

6. There is a water meter reading device installed on the main water line, Yes___ No___.

*This is used by the utility company to calculate the water usage bill for the homeowner.

7. There is an electrical grounding wire on the water main line for the electrical system, Yes___ No___.

**This is a very important safety item and must not be disconnected or rusted.

The grounding wire and clamps must be checked periodically for any rust or corrosion.

The purpose of this wire is to ground the electrical system for safety.

8. The grounding wire does span the water meter and shutoff valve, Yes___ No___.

*The grounding wire should be clamped on both sides of the water meter and the shutoff valve with a jumper cable for safety.

9. There is a pressure reducing valve installed by the water meter, Yes___ No___.

*This valve is generally found in areas where the municipal water system has very good pressure from the street water lines.

10. During the interior inspection, the inspector spot checked the water pressure and drainage by briefly running

the faucets. The water pressure and drainage was in proper working order, Yes___ No___.

10.1 The client was present to view this testing, Yes___ No___.

Plumbing System comments: